T-bar floor coaters are the industry standard for applying floor coatings, and the Bigfoot™ is the professional tool for covering ground quickly. Rated for roughly 10,000 square feet per hour on hardwood, concrete, stone, tile and vinyl.

At 12 inches this is the manoeuvrable width in the line. It is the head to reach for in hallways, closets, bathrooms and stair landings, and the one crews use to cut in edges and tight returns before switching to a wider coater for the open floor.

What separates a coater from a mop or roller is the cushioned squeegee action. Rather than dragging finish across the surface, the pad floats a measured film and lays it down flat, which is what produces a coat free of streaks and bubbles instead of one that needs correcting on the next pass.

Heavyweight applies a thinner coat, not a heavier one

Weighted to control coating thickness, and the naming is counterintuitive. This heavyweight model presses the pad harder and lays down a thinner film. The lightweight version applies a thicker one. Choose heavyweight when a specification calls for a controlled thin coat, when you are laying a sealer or an even build coat, or when too much material would cloud or slow the cure. Supplied with a one piece heavy duty 60 inch steel handle attached to the T bar, so there is no pole to source separately and no joint to work loose mid job.

Specifications

• Item number: 6212
• Size: 12 in
• Refills: Nylfoam®, Woven, or NanoFlock™ (12 in)
• Handle: One-piece 60 in steel, attached
• Origin: Made in USA